Rotary Tools

Perma-Grit rotaries have an integral arbor, enabling them to be used in reversible drive tools. The arbor diameter is 3.1 mm (1/8”) and designed to fit Dremel, Proxon and Flexi-drive drills. They allow the user to cut a wide range of materials, quickly and cleanly, leaving an excellent finish.

SKU: N/A Categories: ,
SKUPriceBuyCart
SKU: RD1
Size: 19mm Style: Disc Grit: CoarsePrice: $16.82
Quantity
Qty in Stock: 7
or Add to Wishlist
SKU: RD2
Size: 32mm Style: Disc Grit: CoarsePrice: $18.27
Quantity
Qty in Stock: 22
or Add to Wishlist
SKU: RD3
Size: 19 & 32 mm Style: Disc Grit: CoarsePrice: $30.91
Quantity
Qty in Stock: 16
or Add to Wishlist
SKU: RF1F
Size: 8mm Style: Narrow cone Grit: FinePrice: $19.42
Quantity
Qty in Stock: 2
or Add to Wishlist
SKU: RF1C
Size: 8mm Style: Narrow cone Grit: CoarsePrice: $19.42
Quantity
Qty in Stock: 7
or Add to Wishlist
SKU: RF2F
Size: 16mm Style: Wide cone Grit: FinePrice: $19.42
Quantity
Out of Stock
or Add to Wishlist
SKU: RF2C
Size: 16mm Style: Wide cone Grit: CoarsePrice: $19.42
Quantity
Qty in Stock: 3
or Add to Wishlist
SKU: RF5F
Size: 7mm Style: Domehead Grit: FinePrice: $19.42
Quantity
Qty in Stock: 2
or Add to Wishlist
SKU: RF5C
Size: 7mm Style: Domehead Grit: CoarsePrice: $19.42
Quantity
Qty in Stock: 3
or Add to Wishlist
SKU: RF3F
Size: 11mm Style: Drum Grit: FinePrice: $19.42
Quantity
Qty in Stock: 1
or Add to Wishlist
SKU: RF3C
Size: 11mm Style: Drum Grit: CoarsePrice: $19.42
Quantity
Qty in Stock: 8
or Add to Wishlist
SKU: RF4F
Size: 20mm Style: Pancake Grit: FinePrice: $19.42
Quantity
Qty in Stock: 4
or Add to Wishlist
SKU: RF4C
Size: 20mm Style: Pancake Grit: CoarsePrice: $19.42
Quantity
Qty in Stock: 3
or Add to Wishlist
SKU: RF6F
Size: 4mm Style: Rod Grit: FinePrice: $19.42
Quantity
Qty in Stock: 2
or Add to Wishlist
SKU: RF6C
Size: 4mm Style: Rod Grit: CoarsePrice: $19.42
Quantity
Out of Stock
or Add to Wishlist

Description

All rotaries are ideal for routing, shaping and removing materials, without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics, etc. Excellent on Perspex, Plexiglass and Lexon. Below 10,000 RPM they will not melt, crack or chip these materials . (Not recommended for use on metal). Note: Rotaries should be fully inserted into the chuck and fully tightened before using. Maximum RPM 20,000 Low – Medium. SAFETY: Always wear protective goggles when using Rotary Tools. CAUTION : Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.

Q & A

Ask a question
There are no questions yet