Rotary Tools

Perma-Grit rotaries have an integral arbor, enabling them to be used in reversible drive tools. The arbor diameter is 3.1 mm (1/8”) and designed to fit Dremel, Proxon and Flexi-drive drills. They allow the user to cut a wide range of materials, quickly and cleanly, leaving an excellent finish.

SKU: N/A Categories: Abrasive Tools, Tools

SKU	Size	Style	Grit	Price	Buy	Cart
SKU: RD1	Size: 19mm	Style: Disc	Grit: Coarse	Price: $15.26	Quantity Qty in Stock: 8
SKU: RD2	Size: 32mm	Style: Disc	Grit: Coarse	Price: $16.58	Quantity Qty in Stock: 6
SKU: RD3	Size: 19 & 32 mm	Style: Disc	Grit: Coarse	Price: $28.04	Quantity Qty in Stock: 2
SKU: RF1F	Size: 8mm	Style: Narrow cone	Grit: Fine	Price: $17.62	Quantity Qty in Stock: 5
SKU: RF1C	Size: 8mm	Style: Narrow cone	Grit: Coarse	Price: $17.62	Quantity Out of Stock
SKU: RF2F	Size: 16mm	Style: Wide cone	Grit: Fine	Price: $17.62	Quantity Qty in Stock: 1
SKU: RF2C	Size: 16mm	Style: Wide cone	Grit: Coarse	Price: $17.62	Quantity Qty in Stock: 2
SKU: RF5F	Size: 7mm	Style: Domehead	Grit: Fine	Price: $17.62	Quantity Out of Stock
SKU: RF5C	Size: 7mm	Style: Domehead	Grit: Coarse	Price: $17.62	Quantity Qty in Stock: 2
SKU: RF3F	Size: 11mm	Style: Drum	Grit: Fine	Price: $17.62	Quantity Qty in Stock: 3
SKU: RF3C	Size: 11mm	Style: Drum	Grit: Coarse	Price: $17.62	Quantity Out of Stock
SKU: RF4F	Size: 20mm	Style: Pancake	Grit: Fine	Price: $17.62	Quantity Qty in Stock: 4
SKU: RF4C	Size: 20mm	Style: Pancake	Grit: Coarse	Price: $17.62	Quantity Qty in Stock: 2
SKU: RF6F	Size: 4mm	Style: Rod	Grit: Fine	Price: $17.62	Quantity Out of Stock
SKU: RF6C	Size: 4mm	Style: Rod	Grit: Coarse	Price: $17.62	Quantity Qty in Stock: 1

Product Details
Questions & Answers

Description

All rotaries are ideal for routing, shaping and removing materials, without tearing or clogging. Use on all Woods, Glass Fibre, Carbon Fibre, Kevlar, Plexiglas, Lexan, Perspex, Acrylics, Plastics, Polystyrene, Ceramics, etc. Excellent on Perspex, Plexiglass and Lexon. Below 10,000 RPM they will not melt, crack or chip these materials . (Not recommended for use on metal). Note: Rotaries should be fully inserted into the chuck and fully tightened before using. Maximum RPM 20,000 Low – Medium. SAFETY: Always wear protective goggles when using Rotary Tools. CAUTION : Carbon Fibre should not be cut using an electric drill, because of the possibility of electrocution.

Q & A

Note: Wicks personnel are not certified aircraft mechanics and can only provide general support and ideas, which should not be relied upon wihout consulting a qualified technician. Wicks assumes no responsibility or liability for any issue or problem which may arise from any repair, modification or other work done from this knowledge base. Any product eligibility information provided here is based on general application guides and we recommend always referring to your specific aircraft parts manual, the parts manufacturer or consulting with a qualified mechanic.

There are no questions yet

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

An error occurred when saving your answer. Please report it to the website administrator. Additional information: