An ultra lightweight corrosion-inhibiting filler for aircraft, marine, and automotive use. Adheres to composites, bare aluminum, steel, and bare or varnished wood.
Epoxy resin with non-MDA hardener.
Superfil Epoxy Filler
| SKU | Contains | Size | Sold By | Hazardous Shipping | Price | Buy | Cart |
Description
- By Weight (preferred): 2 parts A to 1 part B
- By Volume: 2 parts A to 1 part B.
- Thoroughly stir each individual container of part A and part B before combining. Resin or hardener can separate from fillers during storage. After combining parts A and B scape the sides of the Revision on 21 mixing container to insure a through blend. Mix o a consistent high color blue color.
- Cure: Allow to cure at 70° or above for best results. Lower temperatures will lengthen the cure time
- Dry Film Cure: 8 hours at 77°
- Cure to Sand: 12 hours at 77°
- Pot Life: One hour at 77°
- Clean Up: MEK before curing occurs
- Shelf Life: Two years unopened. Avoid storage above 100°. Resin will separate from filler during storage. Remix thoroughly.
Q & A
Ask a question
Can I speak with a human being about applying this product over primer paint it is for hail damage on an aircraft it is a aluminum aircraft that has already been primed
You can contact us and talked to tech support, or contact Consolidated Aircraft Coatings and ask for tech. Thy are the manufacture.
(0)
(0)
Add an answer