Docol® and Strenx® (Domex®)* are a group of steels that are designed for applications where roll forming is used as a forming method. The steels are subjected to special heat treatment in the continuous annealing line, giving a material which can be roll formed into narrow radii.
Characterized by:
- High yield strength – minimize unflatness problems of flat areas. The plastic deformation will be confined to the radii.
- High YS/TS ratio – means that stresses in highly formed regions are comparable to the stresses in slightly formed regions. Small differences in residual stresses over the cross section reduce the tendency for bending and twisting of the profile.
- High internal cleanliness – less slag inclusions in the steel make it possible to roll form into narrow radii.
Technical Mechanical Properties
Docol® | Strenx® | |
Tensile Strength psi (min) | 116,000 psi | 108,000 psi |
Yield Strength psi (min) | 87,000 psi | 101,000 psi |
Elongation min % in 2 | 10% | 10 – 12% |
Product Availability
Grade | Thickness | Weight | |
Docol 800 CR | .0394 | 1.5886 | |
Docol 1000 CR | .0590 | 2.37888 | |
Docol 800 CR | .0787 | 3.17318 | |
Strenx 100 XF | .0984 | 3.96748 | |
Strenx 100 XF | .1181 | 5.0000 | |
Strenx 100 XF | .1574 | 6.3463 | |
Strenx 100 XF | 3/16 | 7.64755 | |
Strenx 100 XF | .1969 | 7.939 | |
Strenx 100 XF | .2362 | 9.65963 |