For brushing or spraying on molds to prevent resin from sticking to the mold. A green viscous water/alcohol film-forming solution, water soluble, particularly recommended as a parting layer or separator between polyester or epoxy resin and mold surfaces of most kinds. Not recommended for use with resins containing water or giving off water during the cure-phenolics for instance. #10 part all is generally applied at room temperature to form a smooth, very glossy film. Will not shrink and pull away from corners or curved surfaces. After resin is cured the film will part easily from the mold and is readily dissolved from the molded parts with water. Use after tool has been paste waxed with part all paste. QT – ORM-D. 5-gal – Hazard – Ship Ground Only!